Photos of Wet magnetic separator

add skype flickrdownload

Technical Parameter of Wet magnetic separator


Model Shell diameter(mm) Shell length(mm) Shell rotation speed (r/min) Feeding size(mm) Processing capacity (t/h)



CTB6012 600 1200 <35 2-0 10-20 1.5
CTB6018 600 1800 <35 2-0 15-30 2.2
CTB7518 750 1800 <35 2-0 20-45 2.2
CTB9018 900 1800 <35 3-0 40-60 3
CTB9021 900 2100 <35 3-0 45-60 3
CTB9024 900 2400 <28 3-0 45-70 4
CTB1018 1050 1800 <20 3-0 50-75 5.5
CTB1021 1050 2100 <20 3-0 50-100 5.5
CTB1024 1050 2400 <20 3-0 60-120 5.5
CTB1218 1200 1800 <18 3-0 80-140 5.5
CTB1224 1200 2400 <18 3-0 85-180 7.5
CTB1230 1200 3000 <18 3-0 100-180 7.5
CTB1530 1500 3000 <14 3-0 170-280 11

Introduction and function of Wet magnetic separator
Wet magnetic separator for particle size below 3mm magnetite, pyrrhotite, roasted ore, ilmenite and other materials, wet magnetic separation, but also for coal, non-metallic minerals, building materials and other materials, iron work, widespread use of iron ore dressing plant a magnetic separator.
Wet magnetic separator is based on customers for their valuable advice and I sum up the experience of developed production of a new generation of magnetic separation equipment. This machine is designed for wet magnetic separation of fine weakly magnetic mineral separation problems and design, use of weak magnetic flux tube in addition to iron, magnetic separation of the magnetic roller means to achieve mine election. Size 3mm below for magnetite, pyrrhotite, roasted ore, ilmenite and other materials wet magnetic separation, but also for coal, non-metallic minerals, building materials and other materials, iron work, iron ore A commonly used concentrator separator.
Wet magnetic separator structure: Wet Drum Separator mainly by the permanent magnet cylinder, roller, brush roller, magnetic system, tank, transmission parts 6 parts. Cylinder by a 2-3mm stainless steel plate welded into the tube, end caps for the aluminum casting or workpiece, connected with stainless steel screws and barrel.

Working principle and Application field of Wet magnetic separator
After the ore slurry tank into the tank after the water pipe water to the mine under the influence of mineral particles into the tank was loose state of a mine. In the magnetic field, the magnetic mineral particles together to form the magnetic occurred "magnetic group" or "flux", "magnetic group" or "flux" in the pulp by the magnetic force, to pole movement, and be attracted to the cylinder on. Concentrate magnetic system with the cylinder to the weakest at the edge of magnetic, mineral water spray in the unloading effect of flushing water was discharged into the concentrate tank to complete the magnetic separation process.

Wet magnetic separator works under the magnetic force and machine force. Wet magnetic Separators are designed to recover ferromagnetic materials. The separators are available in designs and sizes to provide solutions for all applications. The heart of each separator is the magnetic system with its unique design, which has a proven record of high efficiency. The Magnetic Separators are available in cyclic design with process vessel diameters from 220 mm to 3,050 mm.

Copyright © Winnermac.