Photos of Magnetic roller/pulley


add skype flickrdownload

Technical Parameter of Magnetic roller/pulley

single roller

Size (mm)

(Inches)

Production Capacity.

Power Requirement (K.W / H.P)

425 x1200

17x48

2.00 T.P.H.

1.5/2

600x1500

24x60

5.00 T.P.H.

2.2/3

750x1800

30x72

10.00 T.P.H.

3.7/5

1200x1800

48x72

30.00 T.P.H.

5.5/7.5

double rollers

Type  Size Of The Drum
Dia  mm     Length mm
Capacity Ton /hour
KI - 767 300              500 1 Ton
KI - 768 400              550 1.5 Ton
KI - 769 400              600 2 Ton

triple rollers

Type  Size Of The Drum
Dia  mm     Length mm
Capacity Ton /hour
KI - 770 300              500 1 Ton
KI - 771 400              550 1.5 Ton
KI - 772 400              600 2 Ton



Introduction and Application of Magnetic roller/pulley
PERMANENT MAGNETIC Pulleys are ideally used as head pulleys in belt conveyor systems to improve the purity of product and to protect the process equipment from tramp metal damage. The pulley provides continuous, effective to removal of ferrous metal from the product flow.
This method of PERMANENT MAGNETIC ferrous metal separation requires that the magnetic pulley be installed at the discharge end of the conveyor replacing the existing pulley. As the mixture of product and ferrous metal travels over the magnetic head pulley and reaches the drop-off point, A divider plate can be installed to ensure that no remixing occurs when product falls freely from the end of the line into storage bins or processing chutes. Any ferrous metal that is mixed in with the product is attracted and held to the face of the belt and carried to the underside of the pulley
This type of separation acts as secondary protection for deeply embedded metal in the product, which may have not been initially extracted by other process of an overhead suspension magnet
Applications:
Wood & Plastic Recycling
Crushed or Broken Stone
Processing at MRF's
Pallet Recycling
Shredded Tire Processing
Glass Recycling industries

Characteristic af Magnetic roller/pulley
Features:
Flat or Crowned Pulley Face
Four Available Hub Styles: Recessed Hubs, Flush Hubs, Extended Hubs, or No Hubs
Smooth or Lagged Surface
Fixed Shaft or No Shaft
Precision Machined Keyways
Taper Locks and Set Screws
Offered in Rare Earth Neodymium or Standard Ceramic
We offer a full range of magnetic pulleys for compatibility with conveyor systems used in today's applications .Pulleys are sized based on application evaluation. (i.e. belt width, belt speed, burden depth, size of recoverable ferrous. .)

HOME | ABOUT US | PRODUCTS | SOLUTIONS | NEWS |SERVICES|CONTACT US
Copyright © Winnermac.